OnSale LeafBlaster Micro Mesh Rain Gutter Guard 100 Feet. Stainless steel gutter cover shields out debris.
The LeafBlaster Gutter Protection System consists of three main components: a front anodized aluminum drip edge; a type 316 stainless steel V-Bend mesh filter mesh; and a water siphon control strip under the mesh. This type of gutter guard can be installed on various gutter types such as Ogee, half round, fascia, curved, box and many type of roofs such as asphalt shingle, wood shake, flat tile, Spanish tile and stone coated steel. LeafBlaster's specifications were uniquely designed so that it simply slips under the roof shingles and rests on top of the roof-deck/water-barrier (tar paper) to "clamp" the gutter guard in place and stabilize its structure. The solid aluminum front fits snug to the front lip of the gutter via three self-tapping screws for each four foot length section. LeafBlaster should be installed at a 10 to 30 degree pitch in order to maximize product performance.
Eliminates gutter cleaning forever!
Easy installation
Handles over 150 inches of hourly rainfall!
Fits on existing rain gutters, no need to replace existing rain gutters.
Barely visible from the ground!
Fits on virtually any existing rain gutter and roof type.
The lowest cost stainless steel gutter guard protection available anywhere
Keeps out wasps and other pests
Filtered water can also be used in rainwater harvesting!
Will not degrade with exposure to the suns UV rays.
Does not require replacement of existing gutters!
Includes self tapping screws that easily screw through the aluminum from edge into the gutter.
Fits 5 inch gutters and each piece is 4 feet long.
Note: Total order will include 1 manual, 3 self taping screws for each 4 foot section, 1 hex driver, and 4 corner brackets per 100 feet. When the sections are shipped in multiple boxes all of these additional parts may be in one of the boxes. Boxes may also be combined for fewer boxes.
Visit: OrderNow SPT 10000 BTU Window Air Conditioner Energy Star WA-1011S
